Lower Energy Bills with Rim Joist Spray Insulation
Stop air and moisture infiltration at the rim joist (banjoist), the space between your home and basement walls, of your home. Stopping air infiltration is the best defense against energy loss. Your home lets in cold air during the winter and warm air in the summer, resulting in higher energy bills.
Stuffing fiberglass insulation between floor joists is a standard method of insulating the rim joist in many homes. Fiberglass insulation has gaps and voids when installed, allowing air to infiltrate. Because fiberglass insulation doesn't fit snugly, it is air permeable. Rim joists (Ban Joist) expand and contract with the change of seasons allowing air to enter and exit at will. Rim Joist spray insulation is a closed cell application which fills in the whole space without any gaps or voids. Unlike fiberglass insulation, which is only a thermal barrier, the spray foam insulation creates both an air and vapor barrier at the rim-joist. Creating an air barrier at the rim joist becomes vitally crucial because moist air can create condensation. Humid air can filter through fiberglass creating condensation at the rim-joist, which can eventually lead to mold and mildew problems.
Spray insulation sticks to the rim joist eliminating the condensing surface. Improper insulation at the rim joist can result in high energy bills, air quality issues, and moisture damage. The spray insulation is highly adhesive, so it sticks and stays in place as it expands to fill gaps. Once cured, the spray insulation provides an effective air seal as well as insulation. Because the spray insulation doesn't allow air to move through it (which diminishes R-value) it always performs at its full rated R-value.
Waters Basement Services, Inc. offers a solution for stopping air infiltration with Rim Joist Spray Insulation.
- 3 Tips when Considering an Egress Window
- Austin Unloading Trailer
- Basement Entrance Door
- Basement Mold Removal, Cleaning, & Prevention with Anabec
- Before Finishing or Renovating Your Basement
- Benefits of Basement Waterproofing
- Did You Know?
- Does Investing in My Basement Increase the Value of My Home?
- Exterior vs Interior Basement Waterproofing
- First Line of Defense to Keep Your Basement Dry
- Fixing Vertical and Horizontal Basement Wall Cracks
- Frequently Asked Questions
- Garrett helping Papa unload the trailer
- Gutter and Downspout Water
- Importance of Using a Dehumidifier
- Major Causes of Basement Problems
- Most Effective Way to Insulate at the Rim Joist
- Our Grandson Cole helping PaPa with a Wall Crack
- Outside Basement Entrance (Bilco, Gordon Door)
- Painting Basement Walls vs Waterproofing Panel System
- Protect Your Foundation from Water Damage with the Lawn Scape Bubbler Pot
- Repair for Horizontal Crack and Bowed Basement Wall
- Solutions to Common Spring Wet Basement Problems
- Sump Pumps: Why Homeowners Should Periodically Check Their Drainage System
- Tips on Comparing Company Estimates
- Top 3 Causes a Bowed Basement Wall
- Water Back-Up Sump Pumps vs. Battery Back-Up Sump Pumps
- What are Diverters used for in basement waterproofing?
- What Causes Mold? It Could Be Your Damp, Leaky Basement
- Why do I have Water Coming in on the Floor Where the Basement Wall and Floor Meet?
- Why having a Backup Sump Pump is so Important!
- Why the Type of Pipe Used in Drain Tile is So Important
- Why Your Drain Tile Should Be Cleaned